Claymore s gpu dual miner etherium AMD NVIDIA 15.0 – download and configure the miner Blake2s, keccak

• We present you the latest version of the miner – Claymore s gpu dual miner etherium AMD NVIDIA 15.0 (new and updated) (+ Sia, decred. LBRY, Pascal, Blake2s, keccak) for Windows. A program for mining ether, as well as its setup below in the article.
  

This miner for eth mining is very popular, the speed on it’s the fastest, and if you have a desire, you can simultaneously mine another currency, and you don’t need special settings for the video card. It’s enough to set up the miner for the pool of your choice and mine the cryptocurrency. Read here how to do it – How to set up a miner and mining for a pool for a beginner.

Updating — we have added a new miner version claymore 15.0. Please use the latest version.

ETH mining now only works with version 15.0, there will be an error on other versions Pool sent wrong data, cannot set epoch, disconnect.

The latest version at the moment is claymore miner eth 15.0, which you can download from the link – Download here. If the link doesn‘t work, then download here.

Changes and additions in the new version of Claymore s gpu dual miner etherium AMD NVIDIA 15.0:

– Now the miner will work until the 384 era of the dag file (4gb), the old versions will only work up to 299.

– Now NAVI video processors from amd video cards work, but only without dual mode

– Now the miner makes settings for variables automatically (for 4gb amd video cards)

– Code optimization

You can read a little more about how to adjust timings with the -strap command here.

You can also download other versions:

claymore miner eth 14.7 — Download here

claymore miner eth 14.6 – Download here

claymore miner eth 14.5 — Download here

claymore miner eth 14.3 — Download here

claymore miner eth 14.1 — Download here

claymore miner eth 14.0 – Download here

claymore miner eth 12.0 – Download here

claymore miner eth 11.9 – Download here

claymore miner eth 11.8 – Download here

claymore miner eth 11.7 – Download here

claymore miner eth 11.6 – Download here

claymore miner eth 11.5 – Download here

claymore miner eth 11.4 – Download here

claymore miner eth 11.2 – Download here

claymore miner eth 11.1 – Download here

claymore miner eth 11.0 – Download here

claymore miner eth 10.6 – Download here

claymore miner eth 10.5 – Download here

claymore miner eth 10.3 – Download here

claymore miner eth 10.2 – Download here

claymore miner eth 10.1 – Download here

claymore miner eth 10.0 – Download here

Changes and additions in the new version of Claymore s gpu dual miner etherium AMD NVIDIA 14.7:

– Now the miner doesn’t require going into test mode, use the -driver uninstall option with admin rights and reboot.

– The -showpower option has been added to see the consumption statistics when the “s” button is pressed. All cards work with the exception of 7 radeons.

– Also Remote Manager has been updated to show energy statistics

– Problem with -logsmaxsize and -logfile has been fixed

– Code optimization

Changes and additions in the new version of Claymore s gpu dual miner etherium AMD NVIDIA 14.6:

– Now the -rxboost option works on older video cards from AMD, I advise you to apply the -rxboost 1 option to them to increase the mining speed

– Also option -rxboost supports all AMD driver versions

– The -strap option now supports blockchain version of amd drivers

– The problem with “expired” balls has been fixed

– New option “-minspeedtime”

– Statistics on the time the balls were found has been added (average, minimum, maximum), press “s” while mining to see it

– Remote Manager has been updated, there is more information on accepted balls

– Code optimization

Changes and additions in the new version of Claymore s gpu dual miner etherium AMD NVIDIA 14.5:

– We added -rxboost option for amd cards on polaris, try adding -rxboost 1 for 5% more performance as additional memory timings will be applied. It is compatible with the -strap command or your stitched timings.

– Bug when resetting overclocking for Nvidia has been fixed

Changes and additions in the new version of Claymore s gpu dual miner etherium AMD NVIDIA 14.3:

– BSOD bug that was with VEGA cards has been fixed

– Memory timings for nvidia graphics cards have been improved

– Option -strap for NVIDIA cards, steps from -strap 4 to -strap 6 have been added

Changes and additions in the new version of Claymore s gpu dual miner etherium AMD NVIDIA 14.1:

– The Strap option now works for Vega video cards from amd, now you can increase the speed up to 15%, use -strap with a value from 1 to 5

– Better compatibility with AMD 18.XX drivers

– Now miner uses CUDA 10 for nvidia

Changes and additions in the new version of Claymore s gpu dual miner etherium AMD NVIDIA 14.0:

– Now you can change memory timings for windows, and according to the developers, this is up to 20% faster than with firmware. This option is still available for Polaris, for other video cards it will be added later. The -strap command. Drivers 18.XX and newer are required to find the best timings.

– The ability to control fan and temperature for Radeon VII has been added

– Fan control bugs for latest AMD drivers have been fixed

– Minor bugs have been fixed. 

Changes and additions in the new version of Claymore s gpu dual miner etherium AMD NVIDIA 12.0:

– for 2 and 3 gb cards, the commission is now 0

– commission for dual mode reduced to 1%

– we have reduced the required memory to mine ether longer

– cuda 10 support has been added, which increases speed by 2000 on nvidia series

– code optimization

Changes and additions in the new version of Claymore s gpu dual miner etherium AMD NVIDIA 11.9:

– Problem with Keccak balls not working has been fixed

Pros of the Claymore dual miner:

+ More pleasant interface with colored font

+ Ability to simultaneously mine another currency, and the speed on Ether doesn’t decrease. Other currencies Sia, decred. LBRY and Pascal in version 8.0 for amd

+ Suitable for Gpu both Amd radeon (OpenCL) and Nvidia (Cuda)

+ High speed

+ Special settings for the video card are not needed

+ Many interesting but optional settings

+ Doesn’t slow down the system when working at a computer

+ Shows the temperature of the GPU video cards in the miner window

+ Comparatively simple

Minuses:

– The developers of this miner take a small commission for mining, but mining here is still more profitable than on many other miners. Dual mode assumes 1.5% commission (starting from version 11.0), ether mode – 1%.

– Closed source

– Dual mining (parallel mining of another currency) increases power consumption, the load on the power supply, and the cards get hotter (the temperature is higher). But this is a natural disadvantage, not a mistake of the developers.

The miner gained its popularity precisely because of the dual mining mode. At the moment, I recommend it for ether mining.

Below is a description of the miner setup.

Soon we will write an article with settings and interesting commands for Claymore miner dual.

And we will write how to mine in dual mode ether and other currencies in parallel (dcr, sia coin, pascal coin, lybra).

The latest version at the moment is 15.0.

claymore miner eth 15.0 download from the link — Download here. If the link doesn‘t work, then download here.

claymore miner eth 14.7 download from the link — Download here

claymore miner eth 14.6 download from the link — Download here

claymore miner eth 14.5 download from the link — Download here

claymore miner eth 14.3 download from the link — Download here

claymore miner eth 14.1 download from the link — Download here

claymore miner eth 14.0 download from the link — Download here

claymore miner eth 12.0 download from the link — Download here

claymore miner eth 11.9 download from the link – Download here

claymore miner eth 11.8 download from the link – Download here

claymore miner eth 11.7 download from the link — Download here

claymore miner eth 11.6 download from the link — Download here

claymore miner eth 11.5 download from the link — Download here

claymore miner eth 11.4 download from the link – Download here

claymore miner eth 11.2 download from the link – Download here

claymore miner eth 11.1 download from the link – Download here

claymore miner eth 11.0 download from the link – Download here

claymore miner eth 10.6 download from the link – Download here

claymore miner eth 10.5 – Download here

claymore miner eth 10.3 – Download here

claymore miner eth 10.2 – Download here

claymore miner eth 10.1 – Download here

 claymore miner eth 10.0 – Download here

claymore miner eth 9.8 – Download here

Archived version of claymore miner eth 8.0. Download here.

The penultimate archived versions of claymore s dual miner 7.4 (someone needs them more) Download here.

Now I will answer a popular question on my skype – How to set up Claymore s dual ethereum.

Claymore s dual ethereum – miner setup is not very heavy

“Differences between Versions 8.0 and 7.4 – in 8.0 and higher you can mine Pascal in parallel, but in ETH + Pascal mode. Suitable only for AMD video cards, and if you mine only ether, then it is also suitable for NViDIA”

In 7.4, you can mine Sia and decred in parallel. LBRY, suitable for both nvidia and amd

Update – we have added a new miner version claymore 14.0. It is suitable for everything described above. Download only it.

claymore s dual ethereum miner – setting

It starts with downloading Claymore dual

Next, we unpack the archive to any place convenient for you and start setting of Claymore dual.

We find Start.bat, right-click on it, and click “Edit”, after which we see the following

And the setting of the batch file of claymore begins

-epool – after this code, the address of the pool where we are going to mine ether is written, and we write the port of our pool through colons as in the picture.

-ewal – the wallet where our ETH, which we mined, will come to, or to the exchange. I recommend the EXMO exchange, yobit and Binance are also suitable for you.

-eworker – and then we write the name of our worker, you can create any name with numbers and Latin letters, but without symbols and spaces. The worker is needed for the convenience of viewing statistics on the pool.

-epsw – the password from the wallet is located here, it’s not needed on many pools, so we put “x” here

Next, we save all changes and run. If everything started, then you configured claymore dual ethereum correctly, and if something didn’t work out for you, then I advise you to read the detailed article – Setting up ETH mining.

If someone doesn’t understand something, ask in the comments, I will answer everyone!