Electrum how to get out

Today we will talk to you how to take money out of your wallet and make a transfer.

Withdrawing from electrum is easy, so let’s get started.

First you need to choose a service for withdrawal, in our example it will be on the card of the savings bank.

I advise several services:

1. Tytcoin – Good service, but only on Sberbank.

2. X-pay – Good, reliable service. I’ve never failed! Fast translations.

There will be examples on both services.

Also, you can choose from them the one on which the course is more profitable. There’s also one monitoring of exchangers, if you trust it, you can find profitable rates on it. – bestchange.

Let’s start with Tytcoin, we register for a discount.

Let’s choose the direction of BTC – Sberbank. Here we go:

Where highlighted in red, enter the number of bitcoins you want to output, the amount you will receive will be automatically displayed below. Where blue is highlighted, the card number and who it is registered to. Then enter your email address and click on Continue.

We agree to the rules and click “Create application”.

Where it is marked in red, this is the address to throw bitcoin (all have different addresses), copy it. We go to the electrum.

This way you can transfer money to any other wallet, if you need.

We go to the “Send” tab, in the “Recipient” field we insert the address that we copied above. Below in the field is the sum of the bits that we send (in our case 0.2), the attention is paid to mBTC, in our case 0.2 btc = 20mBTC.

Estimated conversion:

1 BTC = 1000mBTC

0.1 BTC = 100mBTC

0.01 BTC = 10mBTC

Then we press “send.”

Enter the password you specified during registration. And click OK. Then you go back to tytcoin.

And you press “I paid.” And wait, usually the money comes in an hour.

…..

Now . X-pay,you need to sign up for it to get a discount on transfers.

Let’s go to X Pai:

Where the red arrows are, we choose the directions. We give them to Bitcoin, we get the Savings Bank.

Where marked in red I give – and we write the amount of Bitcoins that we give, in our case 0.01 BTC.

In the Receive window, the amount you receive will be displayed automatically at the rate.

Where circled in blue, we enter the card number and the name of the cardholder. Agree with the rules and confirm that you are not a robot. Press the “proceed to payment” button.

You will see a window marked in red, this is the purse to which you should transfer 0.01 BTC. Attention each client is discounted x-pay his wallet, everyone has a different one. Do not close the window!

Then we go to the client Electrum.

Electrum transfer

This way you can transfer money to any other wallet, if you need.

Go to the Send tab, then enter the amount, in our case 0.01 BTC, attention – in mBTC unit, below I will show the conversion:

1 BTC = 1000mBTC

0.1 BTC = 100mBTC

0.01 BTC = 10mBTC

And so on, it turns out in our case 10mBTC.

Electrum transfer fee

Next, use the slider to set the commission, the larger it is, the faster the translation is, the smaller the slower. I suggest you leave it in the middle. The amount of commission will be shown when you press the send button. Click Send:

As we can see the commission is 0.01mBTC, that is kopecks, we enter the password from the client and click OK. After that we come back and click I paid.

Everything, the application is created, we wait for receipt of funds on your card, usually within 40 minutes the money comes.

I also advise you to read it:

Which bitcoin wallet is better to create

If you have any questions, write to the comments, thank you all!